How the DGT 3000 Clock Is Different from the DGT 2010

Setting the DGT 3000 at the Start of the Game

Fortunately, the TCL rapidplay time control is pre-configured as "Option 11" when the DGT 3000 clock leaves the factory.

However, unfortunately, neither of the TCL standardplay time controls is pre-configured when the DGT 3000 clock leaves the factory. But the good news is that Options 26 to 30 are reserved for "manual set", so it is recommened that the club configures (for example)

The club only needs to configure the "manual set" options once - the clock "remembers" these settings when it is turned off, and when the batteries are being changed.

Assuming this has been done, then setting the DGT 3000 at the start of the game is easy:

  1. Before the start of the game, turn the clock on using the press-button on the underside of the clock.
  2. If you look at the display carefully, you will see its last-used option number flashing (at the bottom of the display, slightly left of centre). If that is not flashing the option that you want, use the "plus" and "minus" buttons to bring up the option number you want, then press the right-hand "Forward/Accept" button (which has a "play" symbol and an *).
  3. Place the clock on the table and elevate the grey lever on White's side. When the game begins, set White's clock running by pressing the central blue play/pause button.

If you are using incremental time controls, you will notice something which is not obvious on the DGT 2010 clock (because the DGT 2010 doesn't display seconds until a player's clock is under 20 minutes) - each player's per-move increment has been added (once) before the start of the game. This is correct. If, for example, the time control is "60 minutes plus 30 seconds per move", then White theoretically has 60 minutes and 30 seconds to make his first move (not 60 minutes).

What if the Club has Not Configured the DGT 3000 with the TCL Time Controls?

You may need to ask for help if this situation arises! However this is what to do.

To set Option 27 for standardplay matches not involving TBGS

You have now configured Option 27 for standardplay matches not involving TBGS.

To set Option 28 for standardplay matches involving TBGS

You have now configured Option 28 for standardplay matches involving TBGS.